Suppliers of Industrial Supplies Worldwide, part 38

29 Sep 2020 — registered, 18 Sep 2021 — updated
Founded in 2010, with an area of more than 40,000 square meters, the seat of the Jarulan Industrial Belt Co., Ltd. is located in Jiangxi Province, China.

Jarulan has 4 advanced imported production lines that can produce conveyor belt rollers with a maximum width of 4 m. Annual production of conveyor belts is up to 36 million square meters.

Depending on the first-class technical strength and strong manufacturing capacity, Jarulan is able to customize its main products such as PVC, conveyor belt polishing, PVC/PU/PE conveyor belt, transmission belt and high precision timing belt, according to the special requirements of our customers. Not only in Fujian, Guangdong, Shandong and other provinces of China, but also in Turkey, India, Middle East, South America and some European countries, Jarulan has built its full sale and service network, with the cooperation of traffickers to provide customers with timely door to door service. We have the products including PVC belt FDA, EU PVC belt and TPU conveyor belt.

Jarulan PVC conveyor tape is made of environmentally friendly polyvinyl chloride (abbr. PVC) material and high quality polyester fabric. Its PVC working temperature is generally -10 ℃ to + 80 ℃, but we could produce PVC conveyor tape working in environment lower than -10 ℃ as according to customers' special application needs. timing belt AT20 for tile squaring and chamfering machine uses high-quality TPU materials with good resistance to wearing and tearing. Its inside steel cord greatly improves the whole belts' strength, resistance to pulling, thus ensuring its high stability. Its advantages include anti-aging, anti-hydrolysis, UV rays proof, ozone proof, oil and grease proof, acid and alkali proof, etc. Also, the deviation on the parameter of these PU transmission belts is rather small.

1mm to 8mm PVC conveyor belt for general industries achieves stable and accurate transmission while keeping a consistent transmission ratio. It creates low noise during work, and with good cushioning and shock absorption ability, it is able to withstand a longer service life.

We also have a PU conveyor belt. Cold weather resistant PVC conveyor belt can be applied in environments with temperature lower than 15℃. We have a professional temperature machine to test the belt's resistance properties, and most kinds of this conveyor belts will be applied in countries that are very cold during winter, like Sweden and Russia. Their top and bottom are both made of high-quality PVC materials, and the middle will be polyester fabric to obtain good cushioning and shock absorption ability.

Rough top conveyor belt achieves stable and accurate transmission while keeping a consistent transmission ratio. It creates low noise during work, and with good cushioning and shock absorption ability, it is able to withstand a longer service life. This belt has low pre-tension and good mechanical properties, thus ensuring good coordination with the transmission mechanism.

We also have food grade conveyor belt.

PVC conveyor belt prices can be divided into flat PVC conveyor belt and patterned PVC conveyor belt. Different PVC conveyor belt types will have different prices.

Food belt PU for metal detector meets food hygiene standards and can be directly contacted with food. Also, PU material has moderate color with no peculiar smell. Gray PVK logistic conveyor belt features its unique polymer modified material and good cushioning capacity. China manufactured PVC conveyor band with thickness 1mm to 13mm is made of environmental friendly polyvinyl chloride (abbr. PVC) material and high quality polyester fabric.

Jiangxi Jarulan Industrial Belt Co.,Ltd

Contact person: Hutao

Xinde Road, Nanzhuang Town, Chancheng District, Guangdong Province

528061

Foshan City

China

Tel: +86 13450804687

E-mail:

jarulanconveyorbelting.com

25 Sep 2020 — registered, 18 Sep 2021 — updated
Established in 2018 by Mr. Mehmet Parali after having served the steel welding parts production, steel structure projects production and construction industry over a decade as a senior manager and company share holder.

OMKON is specialized in projecting, production and steel structure construction projects with a long list of highly prestigious successfully completed references in Turkey and overseas.

Among the projects carried out there are various steel welding parts production, sky scrapper projects, steel villas, steel frame bridge constructions, facade steel productions and assembly, outrigger assembly works, fire escape stairway productions and assembly, steel frame elevator housing, floor decking solutions, steel reinforced composite column production and assembly, anchor bolt frames production and assembly and various residential, commercial and industrial steel structure construction projects including silos and multi-storey steel frame factory constructions.

OMKON steel structure construction operates at 5000 sqm factory premises having production area, required storage, pre-assembly and loading facilities.

OMKON is ISO 9001:2015 QMS registered and productions compliant with EN 1090 quality norms.

OMKON Yapi San Ve Tic AS

Contact person: Erdem ORAN

Kemalpasa Mah. 7086 Sk. No: 43

35060

Izmir/Bornova/Pinarbasi

Turkey

Tel: +90 2324784888, +90 5454647468

E-mail:

omkon.com.tr

24 Sep 2020 — registered, 07 Sep 2021 — updated
We are specialized in producing water dispensers and water filtration systems.

Moreover, our standing plastic water dispenser has passed CE, CB, SASO, ISO9001 approvals, etc.

In recent years, our standing plastic water dispenser has been exported to Iraq, KSA, Dubai, Russia, Brazil, Thailand, Vietnam, Egypt and other countries.

And the quality of our products has been recognized by customers.

Ningbo Jingxi Life Electric Co., Ltd.

Contact person: oemwater

NO.338,3rd Binhai Road, Hangzhou Bay, Cixi, NingBo

315300

Zhejiang

China

Tel: +86-574-63991333

E-mail:

china-jingxi.com

08 Nov 2019 — registered, 16 Aug 2021 — updated
With more than 50 years of experience, Checon Corporation has developed a core competency in the attachment of contact materials to substrate base material.

In fact, over the years our process development has allowed us to choose from a wide range of proven and quality attachment methods.

Our clients can easily find contact tips, buttons, and rivets that match the specifications of their device design.

Visit us at www.checon.com to learn more about our services.

Checon Corporation

Contact person: Checon

30 Larsen Way

02763

North Attleboro

United States

Tel: 508-809-5112

E-mail:

checon.com

10 Sep 2020 — registered, 16 Aug 2021 — updated
Superior chef, restaurant and hotel linen for the ultimate customer experience.

Johnsons Stalbridge Linen Service

Contact person: Gemma Weeks

23 Wincombe Business Park

SP7 9QJ

Shaftesbury, Dorset

United Kingdom

Tel: 08000939933

E-mail:

stalbridge-linen.com

03 Sep 2020 — registered, 16 Aug 2021 — updated
Yuyao Yuzhong Optical Instrument Co., Ltd. is mainly engaged in the design of precision molds for optical instruments and medical instrument products, and manufactures and produces special high-precision, high-demand plastic parts.

Such as: PEEK, PES, PSU, PMMA and other raw materials.

Yuyao Yuzhong Optical Instrument Co., Ltd.

Contact person:

No.32, East Puyan Bridge, Ditang Street, Yuyao City, Zhejiang Province

315400

Zhejiang

China

Tel: +86 135 06782187

E-mail:

aquilatelescope.com

03 Sep 2020 — registered, 14 Aug 2021 — updated
Zhoushan Longwei Plastic Machinery Co., Ltd. is located in Jintang Town, Dinghai District, Zhoushan City, Zhejiang Province, China.

Founded in 2004, the company is a well-known enterprise specializing in the design, development, production, and sales of single screw, barrel, and conical twin screw and barrel.

The company's design, production of screw and barrel has gained a good reputation for more than 20 years.

With rich experience, superior company team, high-quality raw materials, advanced processing equipment, exquisite production technology, strict production technology, the rigorous quality inspection process, the company creates high-quality screws and barrels to serve our customers.

Zhoushan Longwei

Contact person:

No.3 Wanrong Road, Liuxing, Jintang Town, Dinghai District, Zhejiang

316000

Zhoushan City

China

Tel: +86 580 8340555

E-mail:

foamingscrew.com

27 Aug 2020 — registered, 14 Aug 2021 — updated
The company's core team has been engaged in the metal packaging industry since 1993.

We offer tin cans, custom tin storage boxes etc.

During the development of a quarter of a century, it has accumulated a lot of experience in applied production technology.

In 2017, the company developed a computerized industrial control stamping assembly line with the faculty and student scientific research team of Zhejiang University of Light Industry, which greatly improved the production capacity and standardization level.

Zhejiang Deqing Yaermei Packaging Co., Ltd.

Contact person:

NO.566, North Quyuan Road, Wukang Town, Deqing County, Huzhou

313000

Zhejiang

China

Tel: +86 136 05806928

E-mail:

yaermeipack.com

26 Aug 2020 — registered, 14 Aug 2021 — updated
Fushel: advanced materials manufacturer!

We supply metal, alloy and ceramic powders, plates, rods, foils, strips, bars, tubes, wires, crucibles etc. for the world!

Changsha Fushel Metal Limited

Contact person: Don

Yuelu District, Hunan

410013

Changsha

China

Tel: +86 0731 89747657

E-mail:

fushel.com

25 Aug 2020 — registered, 14 Aug 2021 — updated
ASC Inc. can surely be considered as the leader in PCB manufacturing in the USA when we list out the turnkey manufacturers of printed circuit boards.

It can be of either type like “Post-Bond RF PCB”, “Pre-Bond RF PCB” & “Metal Backed RF PCB, Flex PCB, PCB prototype, Multi-layer PCB, Rogers PCB, Copper PCB, Ceramic PCB, Medical PCB”.

For any electronic device to run properly it requires a good PCB with correct design and proper PCB thermal management to run.

We at American Standard Circuits manufacture any of printed flexible PCB and Microwave PCB.

We manufacture all types of superior-quality, theoretically and practically correct circuits to work in all-weather applications like automotive PCB and outdoor usage PCB.

American Standard Circuit’s lean and error free manufacturing technologies makes us your excellent choice to any of your customized circuits manufacturing needs.

American Standard Circuits (ASC Inc.)

Contact person: American Standard Circuits

475 Industrial Drive

60185

West Chicago

United States

Tel: 6306395444

E-mail:

asc-i.com

19 Aug 2020 — registered, 14 Aug 2021 — updated
Ningbo Jiaerling Pneumatic Machinery Co., Ltd. is a professional pneumatic components manufacturer.

We take the lead in passing ISO9001 quality and CE certificate.

JELPC is a member of China Hydraulic and Pneumatic Seal Industrial Association.

We have the latest CNC machine, automatic assembly production line, online detection equipment, 3D projection measuring instruments, high-precision flow test boards and other advanced production and inspection equipment.

Ningbo Jiaerling Pneumatic Machinery

Contact person:

No 1.Xingjia Road, Pneumatic industrial park, Xikou, Zhejiang

315502

Ningbo

China

Tel: +86 574 88869826

E-mail:

jelpc.com

17 Aug 2020 — registered, 14 Aug 2021 — updated
Bhalla Auto Manufacturing Co. are the best fasteners suppliers & nuts and bolts manufacturers in Ludhiana.

We are counted among the top fastener manufacturing companies in India.

Bhalla manufactures high tensile fasteners with best and modern infrastructure.

We are award winning fasteners suppliers.

Our special products are dual nuts, sprinkler nuts, DTI washers, anti theft nut bolts, allen key bolts, automative bolts and nuts, carriage bolts etc.

We have 25 years of expertise & promise the top quality nuts and bolts at best prices.

We offer hex nuts, hexagonal nuts, hexagon nuts, hex head nuts, hex bolts, hexagonal bolts, hexagon bolts, hex head bolts, allen bolts, CSK bolts, plain washers, flat washers, DIN 125 washers, spring washers, spring lock washers, DIN 127 washers, double coil spring washers, anchor foundation bolts, concrete bolts, foundation bolt fasteners, roofing bolts, roof bolts, shed bolts, road crash barrier fasteners, eye bolts, forged eye bolts, ubolts, u-bolts, scaffoldings.

Bhalla Auto Manufacturing Co.

Contact person: Bhalla Fasteners

C-164 Phase V, Focal Point, Punjab

141010

Ludhiana

India

Tel: 0161 4627469, 09041660007

E-mail:

bhallafasteners.com

17 Aug 2020 — registered, 14 Aug 2021 — updated
We offer pneumatic execution, direction control, air source treatment equipment.

We take "perseverance, fine management, quality service, customer satisfaction" as quality policy, and always adhere to the continuous innovation, and constantly develop new products.

Our products have won more than 30 countries registered patents, including 3 invention patents, 20 new utility models.

Our products are widely used in knitting, medical, food, packaging, petrochemical, metallurgy, coating, vehicles and other mechanical equipment industries.

Ningbo Lida Pneumatic Complete Co., Ltd.

Contact person:

Eighth Quarter, Zhongxing East Road, Xikou, Fenghua

Zhejiang

China

Tel: +86 574 88856388

E-mail:

nblida.com

16 Jul 2020 — registered, 14 Aug 2021 — updated
Founded in 1998, Wintape Measuring Tape Co.,Ltd. is specialized in producing high quality measuring tools.

If you are looking for measuring tools, like promotional tape measure, diameter tape measure, horse weight tape measure, cattle weight measuring tape, steel tape measure, mini steel tape measure with keychain, steel spring, measuring wheel, surveyors measuring tape, belt clips etc, Wintape could be your reliable supplier.

Wintape Measuring Tape Co.,Ltd.

Contact person: David Lin

No.17-18, 14th Floor, Building D, Wanda Plaza, Jianshe Avenue, Huangqi, Nanhai, Guangdong

528000

Foshan

China

Tel: +86 757 81432215, +86 757 81125848

E-mail:

tapemeasure.net

11 Aug 2020 — registered, 13 Aug 2021 — updated
The company offers mold design (Ningbo Kaili Machinery Mould Co., Ltd.) as well as raw parts casting, powder coating and final machining processes.

The company‘s existing production process is quite complete, with advanced manufacturing technology and a group of experienced professionals to meet the special needs of different customers.

There are more than 180 types of parts such as transmission gearbox, clutch shell, housing, car cylinder head, cylinder body, shifting fork and various automobile engines of various models developed by our company.

And our products are mainly used in the fields of automobiles, motorcycles, internal combustion engines, yachts, lifting equipment, electronic communication, agricultural machinery equipment and so on.

Ningbo Kaili Auto Parts Manufacturing Co., Ltd.

Contact person: Kaili

No. 69, Jintong Road, Binhai Industrial Park, Zhejiang

315700

Xiangshan

China

Tel: +86 574 65802978

E-mail:

best-autoparts.com

Suppliers of Industrial Supplies Worldwide, part 1
Suppliers of Industrial Supplies Worldwide, part 2
Suppliers of Industrial Supplies Worldwide, part 3
Suppliers of Industrial Supplies Worldwide, part 4
Suppliers of Industrial Supplies Worldwide, part 5
Suppliers of Industrial Supplies Worldwide, part 6
Suppliers of Industrial Supplies Worldwide, part 7
Suppliers of Industrial Supplies Worldwide, part 8
Suppliers of Industrial Supplies Worldwide, part 9
Suppliers of Industrial Supplies Worldwide, part 10
Suppliers of Industrial Supplies Worldwide, part 11
Suppliers of Industrial Supplies Worldwide, part 12
Suppliers of Industrial Supplies Worldwide, part 13
Suppliers of Industrial Supplies Worldwide, part 14
Suppliers of Industrial Supplies Worldwide, part 15
Suppliers of Industrial Supplies Worldwide, part 16
Suppliers of Industrial Supplies Worldwide, part 17
Suppliers of Industrial Supplies Worldwide, part 18
Suppliers of Industrial Supplies Worldwide, part 19
Suppliers of Industrial Supplies Worldwide, part 20
Suppliers of Industrial Supplies Worldwide, part 21
Suppliers of Industrial Supplies Worldwide, part 22
Suppliers of Industrial Supplies Worldwide, part 23
Suppliers of Industrial Supplies Worldwide, part 24
Suppliers of Industrial Supplies Worldwide, part 25
Suppliers of Industrial Supplies Worldwide, part 26
Suppliers of Industrial Supplies Worldwide, part 27
Suppliers of Industrial Supplies Worldwide, part 28
Suppliers of Industrial Supplies Worldwide, part 29
Suppliers of Industrial Supplies Worldwide, part 30
Suppliers of Industrial Supplies Worldwide, part 31
Suppliers of Industrial Supplies Worldwide, part 32
Suppliers of Industrial Supplies Worldwide, part 33
Suppliers of Industrial Supplies Worldwide, part 34
Suppliers of Industrial Supplies Worldwide, part 35
Suppliers of Industrial Supplies Worldwide, part 36
Suppliers of Industrial Supplies Worldwide, part 37
Suppliers of Industrial Supplies Worldwide, part 38
Suppliers of Industrial Supplies Worldwide, part 39
Suppliers of Industrial Supplies Worldwide, part 40
Suppliers of Industrial Supplies Worldwide, part 41
Suppliers of Industrial Supplies Worldwide, part 42
Suppliers of Industrial Supplies Worldwide, part 43
Suppliers of Industrial Supplies Worldwide, part 44
Suppliers of Industrial Supplies Worldwide, part 45
Suppliers of Industrial Supplies Worldwide, part 46
Suppliers of Industrial Supplies Worldwide, part 47
Suppliers of Industrial Supplies Worldwide, part 48
Suppliers of Industrial Supplies Worldwide, part 49
Suppliers of Industrial Supplies Worldwide, part 50
Suppliers of Industrial Supplies Worldwide, part 51
Suppliers of Industrial Supplies Worldwide, part 52
Suppliers of Industrial Supplies Worldwide, part 53
Suppliers of Industrial Supplies Worldwide, part 54
Suppliers of Industrial Supplies Worldwide, part 55
Suppliers of Industrial Supplies Worldwide, part 56
Suppliers of Industrial Supplies Worldwide, part 57
Suppliers of Industrial Supplies Worldwide, part 58
Suppliers of Industrial Supplies Worldwide, part 59
Suppliers of Industrial Supplies Worldwide, part 60
Suppliers of Industrial Supplies Worldwide, part 61


 




christianity portal